 |
Similar Items |
 |
|
Item # U-2330-25W |
Dare Wood Post Tape Insulator
- Holds tape 1" from post
- Grips tape tightly to prevent whipping and sawing
- Tape holder unlocks to aid installation
- Nails included
- White, Pack of 25
|
|
| |
|
Item # U-IWTNY-RS |
Red Snap’r Polytape Insulator
- Extends tape 2" from the post
- Tape holder unlocks for easy installation
- Nails included
- Yellow, pack of 25
|
|
| |
|
Item # U-WPT25WPX |
Red Snap'r Polytape Extender
- 5"offset
- Fits polytape up to 1½" wide
- Can be used with polywire, rope, and steel or aluminum wire
- Nails included
- Pack of 25
|
|
| |
|
Item # GRL4 |
1 5⁄8" Tube Gate
- 50" height
- Hot-dip galvanized after fabrication
- Includes hardware kit
|
|
| |
|
Item # GRW4 |
Mesh Wire Gate
- 50" height
- 2" x 4" mesh spacing
- Hot-dip galvanized after fabrication
|
|
| |
|
Item # MGK5 |
Grounding Kit
- Includes 3 rods, 3 clamps and 50ft of wire
- Convenient package for easy grounding set up
|
|
| |
|
Item # PD80 |
Kencove PD80 Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # PD8S |
Spring 8/16
- For use with HD8 or HPD16 post driver
- Includes spring ends
|
|
| |
|
Item # PGD2875 |
Titan PGD2875
- Powerful and portable gas-powered driver
- Powered by 1.2 horsepower, 4-stroke engine
- 3¼" barrel
- Drives posts up to 3" in diameter
- Includes 1" and 2" adapter sleeves for posts smaller than 2"
- Weighs 28 pounds
|
|
| |
|
Item # RB2 |
Stafix X-Braid, ¼"
- 8 conductors for maximum conductivity
- Heavy-duty braid for maximum strength
- Ideal for long lengths of semi-permanent fence
|
|
| |
|
Item # RO8 |
Electric Rope 1/3" Diameter White
- Large diameter provides exceptional visibility
- Strong, durable, and excellent conductivity
- UV-stabilized for maximum weather resistance
- 6 stainless-steel conductors
|
|
| |
|
Item # TCHK |
Kencove Chain Grab
- Long chain with anchor hook
- Accommodates smooth and coated wire
- High quality cast walking arms and grabs
|
|
| |
|
Item # U-IWNY-RS |
Red Snap'r Wood Post Insulator
- Economy, claw-style insulator for wood posts
- Raised boss for easy removal
- Nails included
- Yellow, pack of 25
|
|
| |
|
Item # U-MB60 |
Powerfields MB60
- 12-volt battery energizer
- 0.40 output joules
- Includes ground rod
|
|
| |
|
Item # WRH4W |
HotTop® Plus Fence Rail 4¼"
- Combines the beauty of rail fence with the safety of electric
- No painting, peeling, or rusting
- Strength and flexibility is ideal for horses
|
|
| |
|
Item # GSCS |
Extra Spring
- Galvanized for longevity
- Use with 14 ft spring gate (GSC)
|
|
| |
|
Item # PD80H |
Kencove PD80H Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # U-IW5XNB-RS |
Red Snap’r 5” Wood Post Extender
- 5" offset
- Two large shields prevent shorting
- Easy 45-degree front end loading
- NOT FOR USE with polytape or high-tensile wire
- Nails included
- Black, pack of 25
|
|
| |
|
Item # VJXV2 |
Jobe Vortex Float Valve
- Mounting: horizontal or vertical
- Pressure range: 5-100 PSI
- Max flow: 2" - 300 GPM
|
|
| |
|
Item # PDSHD8 |
Kencove PD8 Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
|
|
| |
|
Item # CHRC |
Hog Rings 11⁄16"
- Attach plastic deer net to high tensile guide wire
- Use with Economy Hog Ring Gun (THGC) 11⁄16"
- 16 gauge galvanized steel
|
|
| |
|
Item # GL1 |
KIWI One Way Latch
- One-handed operation
- Prevents gate sagging
- Fits gates with 1 5/8" - 2" round tube
|
|
| |
|
Item # GMA1 |
Fuse
- For use with Kencove and Speedrite energizers
|
|
| |
|
Item # PDSHD8H |
Kencove PD8H Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
|
|
| |
|
Item # PTC |
Safe-T-Post Cap
- Protects animals from sharp edges
- Increases visibility
- Durable uv-resistant material
|
|
| |
|
Item # U-G382504 |
Gallagher M1000 Energizer
- 110-volt, plug-in energizer
- 7.5 output joules
- Ideal for large pastures
- Low-impedance
- Features a voltage bar graph with digital output reading
|
|
| |
|
Item # WG18 |
Zinc/Aluminum, 180 KSI, 12½ Gauge
- Class 3 Zinc/Aluminum-coated high-tensile
- Hand knot or crimp
- Ideal for all perimeter fences
- Minimum break strength = 1,385 lbs
|
|
| |
|
Item # WM6 |
210 KSI, 16 Gauge
- Class 3 galvanized high-tensile
- Polished electroplate
- Ideal for interior electric fences
- Minimum break strength = 614 lbs
|
|
| |
|
Item # WRH5W |
HotTop® Plus Fence Rail 5¼"
- Combines the beauty of rail fence with the safety of electric
- No painting, peeling, or rusting
- Strength and flexibility is ideal for horses
|
|
| |
|
Item # WSR5W |
HorseRail® 5.25"
- Three 12.5 gauge wire core
- Doesn't rust and never needs painted!
- Thirty year limited manufacturers warranty
|
|
| |
|
Item # HMSS |
Mini Spring -Stainless
- Stainless steel
- Use with twine, ribbon, or aluminum wire
- Designed for low tension applications
|
|
| |
|
Item # MSP10-20MB |
Solar Panel Mounting Bracket
- For use with 10-20 watt solar panel
- Preformed hanger allows one-person installation
- Mounting hardware included
|
|
| |
|
Item # PD12S |
Spring 12⁄24
- For use with HD12 or HPD24 post driver
- Includes spring ends
|
|
| |
|
Item # WL6 |
Soft Wire, 16 Gauge
- Class 3 galvanized soft wire
- 16 gauge
- Preloaded on a wooden payout reel
- Easy to repair and retighten
|
|
| |
|
Item # WSR6W |
HorseRail®6.25"
- Three 12.5 gauge wire core
- Doesn't rust and never needs painted!
- Thirty year limited manufacturers warranty
|
|
| |
|
Item # PDSHD10 |
Kencove PD10 Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 12 GPM @ 1,500 PSI
|
|
| |
|
Item # DNC8 |
Monofilament, 8 Gauge
- Ideal for reinforcing deer net
- Sold by the foot -buy only the length you need!
- High strength and easy to handle
|
|
| |
|
Item # GLA |
KIWI Gate Anchor
- Hold gate open in any position
- Prevents gate end from sagging or swinging
- For use with 1 5/8" - 2" tube gates
|
|
| |
|
Item # ITPCW |
T-Post Cap Insulator
- Use with polytape up to 1 1/2" wide, wire or rope up to 1/2" diameter
- UV protected to resist weathering
- Pack of 10
|
|
| |
|
Item # PDSHD10H |
Kencove PD10H Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 12 GPM @ 1,500 PSI
|
|
| |
|
Item # RRSC |
1:1 Value Reel
- Holds up to 1,640' twine or 656' ribbon
- 1:1 gear ratio
- Built-in wire guide
|
|
| |
|
Item # RPTC |
Pigtail Step-In Post
- Holds twine, tape, rope, or ribbon
- Galvanized steel shaft
- Durable, crimped foot pedal
- UV-stabilized plastic
- Total length: 40½"
|
|
| |
|
Item # DNC10 |
Monofilament 10 Gauge
- Use to support or reinforce plastic netting
- Ideal for vineyard trellis applications
- High strength and easy to handle
|
|
| |
|
Item # GNZLC |
Chain Gate Hook - Economy
- One-handed operation
- Spring-loaded locking ring and quick-link
- Galvanized hook and chain
|
|
| |
|
Item # MPS |
Power-Surge Protector
- Economical protection from power spikes/surges
- Indicator light shows status
- Protects from surges up to 6000v
|
|
| |
|
Item # PDSHD12 |
Kencove PD12 Post Driver
- Drives posts up to 10⅛" diameter X 10' tall
- 100,000 pounds of impact at full stroke
- Hydraulic tilt: 20-degree front-back/25-degree side-side
- Hydraulic requirements: 5 GPM @ 2,000 PSI
|
|
| |
|
Item # PT5PG |
HD Painted T-Post
- Made from heavy duty rail steel
- High gloss baked enamel paint
- Proudly made in USA
|
|
| |
|
Item # RRPY |
Step-In Post Yellow
- Holds twine, ribbon or 4 lines of tape up to 1.6" wide
- Extended, reinforced steel spike
- EZ-Clip system with 8 spacing options
|
|
| |
|
Item # TEP |
EzePull 4-in-1 Fence Tool
- Crimps all 12.5 gauge sleeves
- Hardened stainless steel jaws
- Wire cutter, crimper, staple puller, cable stripper
|
|
| |
|
Item # U-ITTW-RS |
Red Snap’r T-Post Polytape Insulator
- Fits standard t-posts
- Use with polywire, polytape, polyrope, steel wire, and aluminum wire
- Tape holder unlocks for easy installation
- Made in the USA
- Pack of 25
|
|
| |
|
Item # U-PT25TP |
Zareba T-Post Polytape Insulator
- Can be used with polytape up to 1½"
- Tape holder unlocks for easy installation
- Fits standard t-posts
- Black, pack of 25
|
|
| |
|
Item # U-SC-160W |
Fi-Shock Polytape T-Post Insulator
- Fits standard t-posts
- Molded from heavy-duty polyethylene
- Large flange prevents arcing
- Tape holder unlocks for easy installation
- White, pack of 25
|
|
| |
|
Item # WBL2D |
200 KSI, 12½ Gauge
- Class 3 galvanized high-tensile
- Works best with crimp sleeves
- Ideal for all perimeter fences
- Minimum break strength = 1,540 lbs
- Painted black
|
|
| |
|
Item # WRHTA4W |
HotTop® Plus Adjustable T-Buckle
- For use with 4.25" HotTop Plus fence
- Hot-dip galvanized and powder coated
- Ideal for use at junctions or cross fence
|
|
| |
|
Item # WST4W |
4.25" HorseRail® T-Buckle
- Hot-dip galavanized and powder coated
- Ideal for t-junctions and cross fence with HorseRail
|
|
| |
|
Item # U-YBSTP25N |
Zareba Reverse T-Post Insulator
- Claw-style insulator
- Fits standard t-posts and u-posts
- Use with polywire, polyrope, steel wire, and aluminum wire
- Snap-on, reversed design
- Yellow, pack of 25
|
|
| |
|
Item # U-816067-25 |
Patriot 2" T-Post Extender
- Available in 2" and 5" offsets
- Reversible design fits back and front of t-posts
- Works with high-tensile, polywire, or ½" polytape
- For permanent or temporary fences
|
|
| |
|
Item # U-817204-25 |
Patriot 5" T-Post Extender
- 5" offset
- Fits standard t-posts
- Quick, easy installation
- Excellent arcing protection to reduce shorting
|
|
| |
|
Item # U-IT5XB-RS |
Red Snap'r 5" T-Post Extender
- 5" offset
- Fits standard t-posts
- Wraparound design ensures secure hold
- Not for use with polytape
- Black, pack of 25
|
|
| |
|
Item # U-S1004-10 |
Patriot 6" T-Post Extender
- 6" offset
- Fits standard t-posts
- Quick, easy installation
- Excellent arcing protection to reduce shorting
- Black, pack of 10
|
|
| |
|
Item # DNC12.5 |
Monofilament 12½ Gauge
- Works well to support or reinforce deer net
- Minimum break strength = 250 lbs
- Sold by the foot
|
|
| |
|
Item # JTP |
T-Post Tape Insulator
- Accommodates up to 1.5" electric tape
- Fits t-post sizes 1 1/2 - 1 3/8"
- Pack of 25
|
|
| |
|
Item # SDZ |
Solid Zinc Cog Tightener
- Solid Zinc cog
- Tensioning with a crescent, box or open end wrench
- Wider cog holds more wire
|
|
| |
|
Item # U-G351504 |
Gallagher B60
- 12-volt battery energizer
- 0.6 output joules
- Ideal for small paddocks and pastures
- Low-impedance
- 12-volt, deep-cycle battery not included
|
|
| |
|
Item # U-G353414 |
Gallagher PortaFence B11
- 12-volt or 6 D-cell battery energizer
- 0.08 output joules
- Ideal for strip grazing
- Low-impedance
- Built-in indicator light
- Batteries not included
|
|
| |
|
Item # U-DE20 |
Dare Enforcer
- 0.05 joules, low-impedance
- Controls up to 1 acre
- Ideal for pets and gardens
- Economical and safe
|
|
| |
|
Item # U-EA5M-BL |
Blitzer EA5M-BL
- 110-volt, plug-in energizer
- 0.10 output joules
- Low-impedance
- Ideal for dogs, poultry, and rabbits
|
|
| |
|
Item # U-2336-25 |
Dare Rod Post Tape Insulator
- Fits ¼" to 9⁄16" diameter rod posts
- Large flange prevents shorts and arcing
- Heavy tape holder unlocks to aid installation
- Yellow, pack of 25
|
|
| |
|
Item # U-EDC15M-BL |
Blitzer EDC15M
- 12-volt battery operation
- 1.0 output joule
- Works with all types of fence
- Ideal for areas with no access to AC power
|
|
| |
|
Item # U-PT25RP |
Rod Post Polytape Insulator
- Fits rod posts ranging from ¼" - ⅝" diameter
- Self-centering post cavity with spin-on nut
- Holds up to 1½" wide tape
- Pack of 25
|
|
| |
|
Item # U-8555B |
Blitzer 8555-B
- 115-volt, high-impedance fence charger
- Use with short-haired animals and pets, steel wire, and aluminum wire
- Not for use with tape, twine, or electric netting
|
|
| |
|
Item # U-8565-D |
Blitzer 8565-D
- 115-volt, plug-in energizer
- High-impedance
- Digital timing
- Fuseless design
- Use with short-haired animals and pets
- Not for use with tape, twine, or electric netting
|
|
| |
|
Item # U-8612-A |
Blitzer 8612-A
- DC-powered
- Use 6-volt or 12-volt battery only
- For light weeds and medium pastures
- Made in the USA
|
|
| |
|
Item # U-EAC10A-BL |
Blitzer EAC10A-BL
- 110-volt, plug-in energizer
- Use with steel or aluminum wire only
- Recommended for small animals
|
|
| |
|
Item # THG |
Hog Ring Gun 3/4"
- Quickly attach apron fence or deer net to wire
- Holds cartridge of hog rings (sold separately)
|
|
| |
|
Item # U-G330414 |
Gallagher Wrangler
- 110-volt, plug-in energizer
- 1.0 stored joule
- Indicator light flashes with every pulse
- Low-impedance
|
|
| |
|
Item # U-G328504 |
Gallagher M150
- 110-volt, plug-in energizer
- 1.5 output joules
- Controls up to 60 acres or 11 miles of fence
- Ideal for small pastures
|
|
| |
|
Item # GSR |
Electric Bungy Cord Gate
- Safer and more visable than spring gates
- Cord stretches to twice its length
- Includes gate hook up set
|
|
| |
|
Item # U-BW-CP-10 |
Dare Corner Post Insulator
- Opens and closes for easy installation
- UV-stabilized, high-density polyethylene
- Black, pack of 10
|
|
| |
|
Item # U-PG-50 |
Parmak Pet Guard
- Protects your garden from small animal damage
- Install indoors only
- Not recommended for livestock fence
- Made in the USA
|
|
| |
|
Item # U-PW50 |
Power Wizard PW50
- 110-volt, plug-in energizer
- 0.05 output joules
- Low-impedance
- Ideal for pest control
|
|
| |
|
Item # U-PW200 |
Power Wizard PW200
- 110-volt, plug-in energizer
- 0.20 output joules
- Controls up to 5 miles or 5 acres of fence
- Low-impedance
- Ideal for pest control
|
|
| |
|
Item # U-PW250B |
Power Wizard PW250B
- DC-powered energizer
- 12-volt battery not included
- 0.25 output joules
- Low-impedance
|
|
| |
|
Item # U-PW300 |
Power Wizard PW300
- 110-volt, plug-in energizer
- 0.30 output joules
- Suitable for controlling all types of animals
- Low-impedance
- Features large indicator light
|
|
| |
|
Item # U-PW350B |
Power Wizard PW350B
- DC-powered energizer
- 12-volt battery not included
- 0.35 output joules
- Low-impedance
|
|
| |
|
Item # GH15 |
Tube Gate Hinge Clamp
- Hot-dip galvanized
- Fits 3/4" hinge bolts
- For use with 1.5" and 2" heavy duty tube gates
|
|
| |
|
Item # NSL120 |
Electric Netting, 9/32/7, Semi-Rigid Stays
- Keep small animals out of your garden
- Single-spike posts built into the netting
- Durable, semi-rigid vertical stays
- Lightweight, portable design
- 32" tall, 7" spacing, 9 lines with graduated spacing
|
|
| |
|
Item # NSLT120 |
Electric Netting, 9/32/7, Twine Stays
- Ideal for gardens
- Keeps out pests
- Twine vertical stays are lightweight and flexible
- Very portable
- 32" tall, 7" spacing, 9 lines with graduated spacing
|
|
| |
|
Item # PV4CRS |
Vector Model 4 Post Driver w/ Rock Spike
- Drives posts up to 12' tall and up to 12" diameter
- 130,000 pounds of impact at full stroke
- 840-pound solid steel hammer
- Includes rock spike with swing arm
|
|
| |
|
Item # PVSMP |
Vector Skid-Steer Mounting Plate
- Fully adjustable and includes hydraulic top-link
- Designed for use with KIWI or Vector Post Drivers
- Mounts to any 3-point accessory
|
|
| |
|
Item # PVV |
Vector Utility Model Post Driver
- Drives posts of any height in almost any terrain
- 90,000 pounds of impact at full stroke
- 530-pound solid steel hammer
|
|
| |
|
Item # VJDA |
Jobe Detach Tail
- Replacement tail for Detach system
- Use with Megaflow or Topaz valves
|
|
| |
|
Item # VJPM |
Protect-A-Mount
- Use with ¾" Topaz or Rojo valves
- Quickly mounts valve on tank
- Provides protection from all animals
- Fits most style tanks
|
|
| |
|
Item # VJVDB |
Jobe Valve Base
- Use with ¾" and 1" Megaflow Valves
- Replacement Megaflow Valve Detach Base
|
|
| |
|
Item # GHBX |
12" Locking Gate Bolt
- Ideal for long or heavy gates
- Extra shaft to secure bolt to post
- Hot-dip galvanized
|
|
| |
|
Item # VJDFN |
Pilot Flow Filter
- Allows some debris to flow through without plugging
- Use with ¾" - 1" Megaflow or Topaz valves
|
|
| |
|
Item # NSLT120-MB60 |
Electric Netting Kit
- 32" high, 120' long electric net
- 0.4-joule, 12-volt energizer
- Ground rod
- Battery not included
|
|
| |
|
Item # VJVG |
Plastic Gasket for Jobe Valves
- Use with ¾" Megaflow, Rojo, or Topaz valves
- Low-density polyethelene replacement washer
- Fits between tail and backnut
|
|
| |
|
Item # TCTGC |
Cable Cutters
- Spring-loaded handle
- Ideal for cutting cable, rope or twine
|
|
| |
|
Item # U-FP1000XD |
Power Wizard FP1000XD
- Dual AC/DC-powered
- 12-volt battery not included
- 1.0 output joules
- Low-impedance
|
|
| |
|
Item # CG1 |
Gripple 1
- Use to terminate 15 - 11 gauge wire
|
|
| |
|
Item # CGS |
Gripple Small
- Simple and effective way to join or tension wire
- Use with 17 to 13 gauge mild wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # CGWT |
Gripple Twister
- Wraps around wire end to prevent injury
- Use with 14 - 10 gauge wire
|
|
| |
|
Item # DB4 |
Earth Anchor 40
- Use to hold down a lifting post
- Galvanized
- Easily installed
|
|
| |
|
Item # DB4DR |
Drive Rod
- 1/4" x 2'
- Use with DB4 earth anchor
|
|
| |
|
Item # DB6DR |
Drive Rod
- 36" x ½" diameter
- Use with DB6 earth anchor
- Hardened, machined, steel rod
|
|
| |
|
Item # DB8I |
Earth Anchor 88
- Use to hold down a lifting post
- 3000lb hold
- Galvanized cast iron
|
|
| |
|
Item # F12-4D |
1⁄2" FiberRod SunGuard
- Pre-drilled every 2 inches
- Will not rust, rot or crack due to cold
- Coated to prevent splintering
|
|
| |
|
Item # F1Q |
FiberRod 1.25"
- 1¼" diameter fiberglass rod
- B-grade, uncoated
- Self-insulating
- Custom cut to desired length
|
|
| |
|
Item # F1R |
1" FiberRod Sucker
- 1" diameter fiberglass rod
- B-grade, uncoated
- Self-insulating
- Custom cut to desired length
- Economical
|
|
| |
|
Item # F38-4Y |
3⁄8" FiberRod
- For use with fencing, line markers or parking lots
- High visibility
- UV-stabilized
|
|
| |
|
Item # FP1 |
Dropper Clip 1"
- Use with PasturePro Fence Droppers
- Rustfree stainless steel
- Easy to install!
|
|
| |
|
Item # G05 |
Insultube
- Use as undergate wire or insulate jumper wires
- .16" ID, .36" OD
|
|
| |
|
Item # GCCB |
Economy Gate Handle
- Galvanized expansion spring
- Allows for movement with gate posts
- Attaches with hook
- Made of UV-stabilized plastic
|
|
| |
|
Item # GCCW |
Economy Gate Handle
- Galvanized expansion spring
- Allows for movement with gate posts
- Attaches with hook
- Made of UV-stabilized plastic
|
|
| |
|
Item # GCNW |
Economy Spring Gate Handle
- Economy plastic gate handle
- For use with spring gates
- Spring gate easily attaches to handle
- Made of UV-stabilized plastic
|
|
| |
|
Item # GD82 |
Lead Out Wire (Double)
- 2 heavily insulated soft galvanized steel wires
- Protective white sheath
- Designed for direct burial
|
|
| |
|
Item # GLW |
Universal Gate Latch
- Attaches to tube and mesh gate up to 1-5/8"
- Simple to open
- Unique locking feature
- Padlock feature
- Corrosion resistant
|
|
| |
|
Item # GXC |
Cattle Panel
- Hot-dip galvanized after fabrication
- 6" x 8" wire spacing
- Ideal for use with t-posts
|
|
| |
|
Item # HB2 |
2" Double-Barbed Staples
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 48 staples per pound
|
|
| |
|
Item # HBM |
1½" Double-Barbed Staple
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 66 staples per pound
|
|
| |
|
Item # HW6 |
Wedge-Loc 60 Socket
- Holds t-post in place when used for diagonal brace
- Use to brace wooden posts with t-posts
- Solid rust-free Aluminum
|
|
| |
|
Item # HW9 |
Wedge-Loc 90 Socket
- Holds t-post in place when used for diagonal brace
- Use to brace wooden posts with t-posts
- Solid rust-free Aluminum
|
|
| |
|
Item # HWUB |
Wedge-Loc Universal Brackets
- Use with insulator to hold electrified wires
- Pre-drilled holes for screws, nails or bolts
- Made with rust-free Aluminum
|
|
| |
|
Item # I71 |
Steel Y Post Insulator
- Pack of 25
- Accommodates high-tensile wire or electric twine
- Large spark guard prevents arching
|
|
| |
|
Item # ICLOFFSET |
Chain-link Insulator
- Extends wire 4.5" from post
- Use with chainlink fence or attach to t-post
|
|
| |
|
Item # ISW |
Snug Wood Post Insulator
- Fast and easy to install
- Wire held 1" from post
- UV inhibitor
- Nails included
- Flexible base fits round or flat posts
|
|
| |
|
Item # J16W |
Flip Top Insulator
- For use with tape up to 1.6" wide
- Convenient flip-top secures fence tape
- UV-resistant plastic resists weathering
|
|
| |
|
Item # JR55W |
Tee Tensioner
- For use at cross junctions of electric tape
- Quick and easy to use
|
|
| |
|
Item # JRPW |
Rod Post Tape Insulator
- For use with up to 1.5" electric tape
- 2 large shields to prevent shorting
- UV-stabilized to resist weathering
|
|
| |
|
Item # JWCT2W |
Fi-Shock Wood Post Polytape Corner Connector
- Fits polytape up to 2" wide
- For use on wood posts at corners, ends, or t-junctions
- Molded from UV-stabilized, high-density polyethylene
- All metal parts are stainless-steel
|
|
| |
|
Item # JWPW |
Wood Post Tape Insulator
- Accommodates tape up to 2" wide
- UV-protected plastic resists weathering
- Made in USA
|
|
| |
|
Item # KIWISCHOOLF17 |
KIWI Fence School Fall 2017
- How to build high-tensile fence, electric fence, woven wire fence, and horse fence
- Construction techniques and safety requirements
- Hydraulic post driver operation
- Estimating and job calculating guidelines
- Next Fence School will be held Fall 2017
|
|
| |
|
Item # KPD5TH4 |
4.5" Standard Auger Head
- For use with 4.5" auger flight
- Ideal for hard soil or soft rock
- Easily replaceable carbide tipped teeth
|
|
| |
|
Item # KPDA |
KIWI Auger
- Powered by HD hydraulic motor
- Includes housing, motor, auger flight
|
|
| |
|
Item # KPDAB |
Auger Bearing
- For use with standard Kiwi auger system
|
|
| |
|
Item # KPDAHK |
Auger Hose Kit
- Includes hoses, couplings and fittings
- For use with Kiwi Hydraulic Auger System
|
|
| |
|
Item # KPDBDH4 |
4.5" Blue Demon Head
- Uses 5 replaceable carbide insert bits
- Ideal for abrasive cutting conditions
- Heavy-duty casting head
|
|
| |
|
Item # KPDSS |
KIWI Skid-Steer Post Driver
- Drives all types of wood or steel posts
- 120,000 pounds of impact at full stroke
- 50-degree side-side and front-back tilt
- Hydraulic requirements: 15 GPM @ 1,500 PSI
|
|
| |
|
Item # KPDT3P |
KIWI Tractor-Mounted Post Driver
- Drives all types of wood or steel posts
- 120,000 pounds of impact at full stroke
- 48" side slide
- 50-degree side-side and front-back tilt
- Hydraulic requirements: 15 GPM @ 1,500 PSI
|
|
| |
|
Item # MFC |
K-CLIPS®
- Stainless steel
- Use to secure warning signs or fence flags
- Attach to any gauge wire or electric twine
|
|
| |
|
Item # MPC3 |
Triple Jumper Leads
- Made with stainless-steel spring clips
- Connect up to 3 lines of fence
|
|
| |
|
Item # MPCAB |
Jumper Lead
- Jumper lead with clip and eyelet
- Use to connect energizer to fence and/or ground
- 4'
|
|
| |
|
Item # MSC40 |
Solar Charge Controller ‐ 40 Amp
- Protects your battery from being overcharged by the solar module or over-discharged by the load
- Pulse-Width Modulation battery charging can greatly increase the lifetime of your battery
- Works with solar panels up to 400 watts
|
|
| |
|
Item # MSG |
Storm Guard
- Easy to use and install
- Protects charger from lightning
- Use with chargers with 1 joule or greater output
|
|
| |
|
Item # MTC6 |
Charger 6V Taper
- Use with 6 volt solar fence chargers
- Ideal for recharging battery
- Part#951
|
|
| |
|
Item # NRP |
28" Electric Netting Post
- Split-top post to allow re-positioning
- Foot pedal and steel spike for easy installation
- Use for extra support in uneven terrain
|
|
| |
|
Item # PD100SS |
Kencove PD100SS Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: minimum 12 GPM @ 1,500 PSI
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PD80HSS |
Kencove PD80HSS Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15 degree front-back/15 degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PD80SS |
Kencove PD80SS Post Driver
- Drives posts ties up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt: 15 degree front-back/15 degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PDN1000 |
Nitro 1000 Post Driver
- Powered by nitrogen
- Minimal maintenance
- Safest driver on the market
- Available for skid-steer or excavator
|
|
| |
|
Item # PDN750 |
Nitro 750 Post Driver
- Powered by nitrogen
- Minimal maintenance
- Safest driver on the market
- Available for skid-steer or excavator
|
|
| |
|
Item # PP1.25X6W |
PasturePro Post 1.25" x 6'
- Wood-plastic composite flexes on impact
- Lightweight, yet extremely durable
- Self-insulating and easily drilled
|
|
| |
|
Item # PP1.5X5.5W |
PasturePro Post 1.5" x 5.5'
- Wood-plastic composite flexes on impact
- Lightweight, yet extremely durable
- Self-insulating and easily drilled
|
|
| |
|
Item # PP1.5X6W |
PasturePro Post 1.5" x 6'
- Wood-plastic composite flexes on impact
- Lightweight, yet extremely durable
- Self-insulating and easily drilled
|
|
| |
|
Item # PP1.5X7W |
PasturePro Post 1.5" x 7'
- Wood-plastic composite flexes on impact
- Lightweight, yet extremely durable
- Self-insulating and easily drilled
|
|
| |
|
Item # PP1.625X6W |
PasturePro Post 1.625" x 6'
- Wood-plastic composite flexes on impact
- Lightweight, yet extremely durable
- Self-insulating and easily drilled
|
|
| |
|
Item # PP1X3W |
PasturePro Dropper 1" x 3'
- Self-insulating, wood-plastic composite
- Lightweight, yet extremely durable
- Won't rot, rust, or crack
|
|
| |
|
Item # PP1X4W |
PasturePro Dropper 1" x 4'
- Self-insulating, wood-plastic composite
- Lightweight, yet extremely durablee
- Won't rot, rust, or crack
|
|
| |
|
Item # PP1X5W |
PasturePro Dropper 1" x 5'
- Self-insulating, wood-plastic composite
- Lightweight, yet extremely durable
- Won't rot, rust, or crack
|
|
| |
|
Item # PPPD |
Pilot Driver
- Perfect for tough, rocky soil
- Steel spike and large handles
- Creates a 1" pilot hole
- Use with PasturePro composite posts
- Creates a 1" pilot hole
|
|
| |
|
Item # RPPS |
45" Stirrup Post
- 45" total length
- Top clip holds the fence 38" above the ground
- 2 clips for 1½" wide polytape and 6 clips for rope, wire, and narrow polytape
- 7" metal spike
|
|
| |
|
Item # RTT |
Twist-Tight Tensioner
- Use with light gauge wire, twine or hot ribbon
- Easily take up slack in any portable fence line
|
|
| |
|
Item # TCTXL |
Knipex 9⅞" Wire Cutters
- 9⅞" handles provide more leverage
- Operate with two hands for maximum cutting force
- Induction-hardened cutting edges and chrome-vanadium, heavy-duty steel
- Made in Germany.
|
|
| |
|
Item # TDBS |
Square Head Drive Bit
- #2 square drive bits
- For use with 1.75" stainless steel screws
- 2 per pack
|
|
| |
|
Item # TDSD |
Staple Starter
- Very simple to use
- Has no moving parts to damage
- Saves your fingers and prevents staples from mushrooming
- Use with standard fence staples up to 8 gauge
|
|
| |
|
Item # TFDR |
Rapid Tightener
- Fast and easy to use
- Use with EZ-Daisy strainers
|
|
| |
|
Item # TFP |
Fence Pliers
- Great for cutting soft wire
- Hammer head and staple puller
|
|
| |
|
Item # THS4 |
Spooler Handle Set
- Provides maximum leverage
- Includes 2 ratchets, handle and spooler pin
- Use with 4" Horserail Spoolers
|
|
| |
|
Item # TMWE |
Economy Measuring Wheel
- 12½" diameter wheel
- Reads up to 10,000'
- Foldable handle
- Great value for large fence projects or contractors
|
|
| |
|
Item # TRSD |
1" Staple Driver
- For use with 1" Ponyrail
- Easy to use
- Prevents bent staples
|
|
| |
|
Item # U-01404.92 |
Zareba Insulated Hook-Up Wire
- Use as a lead-out wire from fence charger to the fence or as a jumper wire between fence strands
- Can also be used underground between gate openings
- Insulation rated up to 20,000 volts
- 14 gauge, Class 3 galvanized wire
- Prevents voltage and energy loss
|
|
| |
|
Item # U-1714-5 |
Dare 10" Brace Pins
- Used to pin corner and end braces
- 3/8" diameter X 10"
- Galvanized steel
|
|
| |
|
Item # U-1752-10 |
Dare Corner Post Insulator
- Rugged design with large flanges
- Made from UV-stabilized, high-density polyethylene
- Easy to install
- Pack of 10
|
|
| |
|
Item # U-2249-25 |
Dare Wood Post Pin-Lock w/ Nails
- Attached pin locks and unlocks fence wire to aid installation
- Large flange prevents shorts and arcing
- Heavy, solid wire holders for long life
- Pack of 25, nails included
|
|
| |
|
Item # U-2453 |
Dare Insulator Tubing
- Rigid Polyethylene black
- 50'
- For High-tensile or temporary electric fences
|
|
| |
|
Item # U-301-569R |
Long Way Replacement Battery
- Rechargeable valve regulated lead-acid battery
- Valve-regulated
- Lead-acid
- Non-spillable
- 4-volt, 4.5 amp-hour, 20HR
|
|
| |
|
Item # U-451 |
Dare Corner/End Insulator Assembly
- Perfect for high-tensile fence corners and ends
- Will withstand continuous strain
- Self-locking nut will no vibrate loose
- All metal parts are zinc plated to resist rust
- 3/8" High carbon steel bracket will not bend
|
|
| |
|
Item # U-A-71B |
Fi-Shock Line Tightener
- Tightener for electric fence
- Tightens polywire, ½ polytape, and wire up to 9 gauge
- No tools required
|
|
| |
|
Item # U-C-1 |
Power Wizard Polytape Connector
- Polytape connector used to connect energizer to polytape or polywire
- May be used as an end clamp or to fasten tape to gate handle
- Pack of 2
|
|
| |
|
Item # U-DP4-5-100 |
Dare 9 Gauge Wire Splice Sleeves
- Use to splice 9 gauge smooth wire
- Will splice 12½ and 13½ gauge barbed wire
- Faster and more reliable than twisted wires
|
|
| |
|
Item # U-EAC25M-BL |
Blitzer EAC25M-BL
- 110-volt, plug-in energizer
- 1.0 output joules
- Controls up to 25 miles of fence
- Low-impedance
- Ideal for horses, cattle, sheep, llamas, pigs, and predator control
|
|
| |
|
Item # U-EFK |
Parmak Electric Fence Kit
- Ideal for pets, backyards, and gardens
- 100' coil of wire
- Eight 2' fiberglass posts
- One 2' ground rod
- 10 wire clips
|
|
| |
|
Item # U-ESP30M-BL |
Blitzer ESP30M-BL
- Solar energizer
- 0.5 output joules
- For use with all types of wire
- Low-impedance
|
|
| |
|
Item # U-G344404 |
Gallagher S17
- Solar-powered operation
- 0.17 output joules
- Equipped with 1.5-watt solar panel
- Low-impedance
- Weatherproof case
- Internal, rechargeable battery included
|
|
| |
|
Item # U-G503014 |
Gallagher Digital Voltmeter
- Monitors fence voltage and helps trace fence line shorts and faults
- Reads voltage for battery energizers
- Uses one 9-volt battery
- Pocket size
|
|
| |
|
Item # U-G623044 |
Gallagher Polytape
- ½" x 656'
- 5 stainless-steel conductors
- Ideal for portable electric fences
- White
|
|
| |
|
Item # U-G627014 |
Gallagher Double-Insulated Cable
- 65'
- Suitable for under-gate wire
- Softer outer layer for easier stripping
- Suitable for initial lead-out lengths
- 12½ gauge galvanized wire
|
|
| |
|
Item # U-G66913 |
Gallagher Polytape Insulator
- Firmly secure polytape to post
- UV-stabilized
- Rubber pad eliminates tape wear
- Positive locking and quick release
- White, pack of 10
|
|
| |
|
Item # U-G682434 |
Gallagher T-Post Wide Jaw Pin-Lock Insulator
- Fits standard t-posts
- Pin-lock allows for easy wire installation and removal under tension
- Wide jaw design for use with coated electric wire, polyrope, and high-tensile wire
- UV-stabilized
- Green, pack of 10
|
|
| |
|
Item # U-GHKS16-Z |
Zareba Spring Gate
- Highly visible
- Expands up to 16'
- Kit includes plastic gate handle and 2 gate insulators
|
|
| |
|
Item # U-GHRY-Z |
Zareba Rubber Gate Handle
- Durable and rugged
- Use with all fence wire
- Insulates against shocks
- Withstands cold weather
- Spring-loaded
|
|
| |
|
Item # U-HTGCS1225 |
Zareba Gritted Crimp Sleeves
- For 14½-15½gauge wire
- Superior wire gripping for strong splices
- Use 3 sleeves to splice wire, 2 sleeves for end post loops and in-line strainer attachment
|
|
| |
|
Item # U-I-10 |
Power Wizard T-Post/Wood Post Top Insulator
- Use with all smooth wire, polywire, polyrope, and polytape up to 1½"
- Can be nailed on top of wood posts
- Fits standard t-posts
- UV-stabilized, high-density polyethylene
- Yellow, pack of 10
|
|
| |
|
Item # U-I-13 |
Power Wizard 5" Wood Post Extender
- Wood post extender insulator
- 5" offset
- Use with all types of standard smooth wire and polywire
- Install over or through field fence
- Includes nails
- UV-stabilized
- Yellow, pack of 10
|
|
| |
|
Item # U-I-14 |
Power Wizard Snug Wood Post Insulator
- Use with standard smooth electric fence and polywire
- Holds wire 1" from post
- Large flange prevents shorts
- Flexible base fits round or flat-sided posts
- UV-stabilized
- Yellow, pack of 25
|
|
| |
|
Item # U-I-17 |
Power Wizard Chain-Link/U-Post Insulator
- Holds securely to both sides of chain-link fence
- Fits standard u-posts
- Wire held 1" from post
- Snaps on without tools
- UV-stabilized
- Yellow, pack of 25
|
|
| |
|
Item # U-I-31 |
Power Wizard T-Post Topper
- Rubber t-post topper
- Covers top of t-post to reduce injury to your animals
- White, pack of 25
|
|
| |
|
Item # U-I-5 |
Power Wizard Safety Top and Tape Insulator
- Use with polytape up to 1½" polywire, steel wire, or aluminum wire
- Fits standard t-posts
- May be installed facing front, back, right, or left
- Grips tape tightly to prevent whipping and sawing
- Protects valuable livestock from sharp, jagged t-post tops
- UV-stabilized
- White, pack of 10
|
|
| |
|
Item # U-ICLXY-RS |
Chain Link Insulator
- Secure insulator for chain-link fence
- Extends wire 4" from fence
- Heavy-duty plastic brackets clamp to the fence
- Pack of 25
|
|
| |
|
Item # U-ITCPY-Z |
Zareba T-Post Top Insulator
- T-post safety cap and insulator
- Fits standard t-posts
- Protects animals from sharp-edged t-post tops
- Use with any gauge wire
- Yellow, pack of 10
|
|
| |
|
Item # U-ITPLB-RS |
T-Post Pin-Lock Insulator
- Fits 1.25-1.33# T-posts
- Use with polywire, polyrope and wire
- Available in Black/Yellow/White
- Made in the USA
|
|
| |
|
Item # U-IWSIRB-RS |
Red Snap'r Wood Post Screw-In Insulators
- For use with polywire, polyrope, steel wire, and aluminum wire
- No tools required
- Can be used as corner or line post insulator
- Black, pack of 25
|
|
| |
|
Item # U-P-3C |
Fiberglass Post End Cap
- Black fiberglass post end caps
- Prevent splintering the end of fiberglass rods
|
|
| |
|
Item # U-PT25WP |
Red Snap'r Polytape Wood Post Insulators
- Designed for low-impedance and standard duty-fence chargers
- 2-nail or screw installation
- Long arcing distance protection from wire to post
- Will accommodate steel wire, polytape up to 2", and rope up to ½" diameter
- UV-stabilized
- Black, pack of 25
|
|
| |
|
Item # U-PT656W1-Z |
Zareba Polytape
- 656'
- 8 stainless-steel conductors
- 320 lbs break strength
- Easy to install
- Highly visible
- White
|
|
| |
|
Item # U-PTJK1 |
Zareba Polytape Jumper Kit
- For use with polytape
- Use to connect strands of polytape
- Kit includes 5' of electrical wire, 4 stainless-steel screws, and 4 wing-nuts
|
|
| |
|
Item # U-RSW500 |
Zareba Polywire
- 500'
- 3 strands of stainless-steel conductors
- Ideal for equine
- Highly visible
- For temporary grazing or with permanent perimeter fencing
|
|
| |
|
Item # U-SC-140 |
Fi-Shock Wood Post Polytape Insulator
- Use with wire, polywire, and polytape up to 2"
- Includes double-headed nails
- Tape holder locks and unlocks for easy installation of tape and wire
|
|
| |
|
Item # U-SS-725RP |
AC Fido Shock Charger Kit
- Electric-powered pet deterrent kit
- Keep pets and pests out of lawns and gardens
- Includes aluminum wire, PVC fence poles, ground rod, cotter pins, and ground clamp
|
|
| |
|
Item # U-SS-750RPX |
Havahart Electric Fence Kit
- Above-ground electric fence kit
- Includes fence energizer, aluminum wire, PVC fence posts, cotter pins, extra fuses, and ground rod with clamp
|
|
| |
|
Item # U-T-5 |
Kencove Digital Voltmeter
- Reads up to 9,900 volts
- Easy-to-read LCD display
- Use to test and troubleshoot electric fence and ground wire
- Includes 9-volt battery
|
|
| |
|
Item # U-WC-100 |
Fi-Shock 17 Gauge Wire
- 100' of galvanized, 17 gauge wire
- Basic, economical wire for electric fence
- 125-145 lbs break strength
- Tensile strength of 90,000-105,000 PSI
|
|
| |
|
Item # U-WJ25 |
J-Bolt with Wing-Nut
- Use to attach ceramic, plastic square, and knob insulators to rod posts
- Fits ¼" - ½" rod posts
- Wing-nuts included
|
|
| |
|
Item # U-WP25N |
Red Snap'r Wood Post Claw Insulator
- Pin-lock wood post insulator for high-tensile fence
- Removable pin-lock holds wire securely
- 2-nail installation (nails included)
- Made from UV-stabilized, high-density polyethylene
- Black, pack of 25
|
|
| |
|
Item # U-WPT25WP |
Red Snap'r Polytape Wood Post Insulator
- One nail installation, nails included
- Raised ribs bite into post to prevent insulator from twisting
- Will accommodate all size polytape up to 1½ wide
- White, pack of 25
|
|
| |
|
Item # U-WPT4UT |
Zareba Polytape Tensioner
- Corner insulator tensioner
- In-line tensioner
- Use to make up and down hill direction changes
|
|
| |
|
Item # U-WPT4UTEP |
Zareba Polytape Tensioner
- Use for connections to fence controller
- Use with cross fencing and strand jumping
- Kit includes 4 universal tensioners and screws and 4 stainless-steel connector plates
|
|
| |
|
Item # U-WPTC25 |
Zareba Polytape Clip
- Use to secure loose polytape ends
- UV-stabilized
- Made in the USA
- White, pack of 25
|
|
| |
|
Item # U-WPTGHK1 |
Zareba Polytape Gate Kit
- For use on wood posts
- Durable, weather-resistant design
- Not for use with high-tensile
|
|
| |
|
Item # U-YCP10 |
Zareba Corner Insulator
- Standard-duty corner insulator
- For use with polywire or light gauge steel and aluminum wire
- Yellow, pack of 10
|
|
| |
|
Item # U-YPT25TPY |
Zareba T-Post Polytape Insulator
- Fits standard t-posts
- Works with polytape up to 2"
- Large flange prevents arcing
- UV-stabilized
- Yellow, pack of 25
|
|
| |
|
Item # VCR |
Quick-Coupler Riser
- One-handed operation
- Use in above ground or buried water systems
|
|
| |
|
Item # VCTMA |
Jobe Tank Mount Adapter
- Use to mount a float valve in a tank with a garden hose connection
- ¾" pipe thread to ¾" hose thread
- Max pressure: 150 PSI
- Swivel end for garden hose to eliminates twisting the hose while tightening
|
|
| |
|
Item # VFA |
Fence-Alarm
- Provides real-time updates to your mobile phone via text or email
- Works with any brand of fence energizer
- Can be placed anywhere along your fence
- Includes ground rod, hookup wires, connection clamps, and a 6-volt battery
- One year of free fence monitoring protection
|
|
| |
|
Item # VJF |
Jobe Tranzformer Valve
- Unleash the potential of your water supply
- Fits most over the top clamp on float valves
- Increase flow into your trough
- Made tough to last
|
|
| |
|
Item # WEBF4W |
Flat End Buckle
- Galvanized and powder coated
- Designed to attach HorseRail to posts in dips/rises in terrain
|
|
| |
|
Item # WL4SF |
Soft Wire, 14 Gauge
- Class 3 galvanized soft wire
- 14 gauge
- Preloaded on plastic spool or wooden payout reel
- Easy to repair and retighten
|
|
| |
|
Item # WM2CW |
Coated Wire -Unbonded
- High visibility and safety
- Unbonded for easier stripping-splicing
- Made in USA
|
|
| |
|
Item # WNS2D |
Stainless-Steel Wire, 13 Gauge
- 13 gauge stainless-steel wire
- Ideal for interior electric fences
- Use as an offset wire
- Must be electrified
- Minimum break strength = 870 lbs
|
|
| |
|
Item # WR4W |
1" Ponyrail 14 Gauge
- Two 14 gauge core wires for strength
- High visibility and low maintenance
- Twelve year limited warranty
|
|
| |
|
Item # WSB4W |
Splicer Buckle
- Join two sections of HorseRail quickly
- Galvanized and powder coated for longevity
|
|
| |
|
Item # WSBT4W |
Top Bracket
- Use to attach top line of rail to wood post
- Galvanized and powder coated
|
|
| |
|
Item # WSPSB |
Staple Bracket
- Galfan coated to resist weathering
- Use to attach 4.25" Horserail
|
|
| |
|
Item # WSS6BL |
Spooler
- Designed for horse safety
- Hot-dip galvanized and powder coated
- Use to tension Horserail or Hottop
|
|
| |
|
Item # WSSS5W |
5.25" Split Spooler
- Use on existing Horserail fence
- Maintains tension on fence line
- Galvanized and powder coated
|
|
| |
|
Item # WSSS6W |
6.25" Split Spooler
- Use on existing Horserail fence
- Maintains tension on fence line
- Galvanized and powder coated
|
|
| |
|
Item # WTT12SF |
Aluminum Fence Wire, 14 Gauge
- Ideal for electric fence
- Preloaded on plastic spool or wooden payout reel
- Rustproof wire can last up to 50 years
- Easy to repair and retighten
- .08" diameter
|
|
| |
|
Item # U-A-20KX |
Havahart Pet/Small Animal Accessory Kit
- Make a short fence for pets and small animals
- Includes 100' of 17 gauge aluminum wire, eighteen 23" PVC fence posts, 50 cotter pins, a fence tester, electric fence warning sign, 22" ground rod, and one ground rod clamp
- Does NOT include energizer
|
|
| |
|
Item # NR72 |
Electric Netting 10/28/7
- Ideal for protecting gardens from critters and pests
- 10 horizontal lines, 28" height, 7" vertical line spacing
- Provides excellent predator protection
- Easy to set up and move
- Semi-rigid vertical stays, graduated spacing
- Double-spiked step-in posts are built into the netting
|
|
| |
|
