Quik-End 9 Gauge

The Quik-End is used for terminations at end posts. Use this size for each 8 or 9 gauge wire on your fence.
To install the Quik-End, drill a 3⁄8" hole through the end post and pull the wire through. Then put the Quik-End on the wire and tap it lightly into the hole. If final tensioning is to be done with the Quik-end, pull the wire to the end post with a chain grab, then push the slack through the hole and Quik-End. For faster, easier tensioning, use the (TGTTP) Torque Tool.