Wrap Connector Each
The Wrap Connector is a pre-formed wire spiral with grit glued to the inside which contacts and holds line wires. Two wrap connectors should be twisted onto the wire for in-line splices and have a holding strength equivalent to the full strength of the wire when used this way. This connector works very well to form tie-back loops onto 12½ gauge wire for hooking electric gate handles upon when the gate is open.
Twist the first third of the connector onto the fence wire. Bend the middle third into a loop and twist the last third of the connector back onto the fence wire beside the first part of the connector. Use two wrap connectors when they are used for tying off wire at end posts. Use only with 12½ gauge wire.