Shopping Cart
0 items in your cart
Welcome Sign in or create a new account

Zinc/Aluminum, 180 KSI, 12½ Gauge - 2,160' Coil

Zinc/Aluminum, 180 KSI, 12½ Gauge
 

The corrosion resistance properties of ZA (Zinc/Aluminum) wire are known to be approximately 4 times that of comparably coated galvanized wire. Kencove's Z/A wire has the same coating weight as our Class 3 galvanized wire (.80oz/square foot), and is drawn after coating to give a smooth surface. This wire will turn a darker shade of gray than our other wires.

  • Class 3 zinc/aluminum high-tensile wire
  • 180 KSI, 12½ gauge
  • 2,160' coil
  • Hand-knot or crimp
  • Minimum break strength = 1,385 lbs
Longest Lasting


Item # WG18U
Weight 56.59 lbs
$44.00 COIL
QTY

Save on 40 - $43.00
Shipping
Status 

Similar Items
Item # WG18 Zinc/Aluminum, 180 KSI, 12½ Gauge
  • Class 3 Zinc/Aluminum-coated high-tensile
  • Hand knot or crimp
  • Ideal for all perimeter fences
  • Minimum break strength = 1,385 lbs
4,000' Coil
$74.75
 
Item # WG18T Zinc/Aluminum, 180 KSI, 12½ Gauge
  • Class 3 Zinc/Aluminum-coated high-tensile
  • Hand knot or crimp
  • Ideal for all perimeter fences
  • Minimum break strength = 1,385 lbs
1,000' Coil
$24.75
 
Item # WG18TS Zinc/Aluminum, 180 KSI, 12½ Gauge
  • Class 3 Zinc/Aluminum-coated high-tensile
  • Hand knot or crimp
  • Ideal for all perimeter fences
  • Minimum break strength = 1,385 lbs
 

Related Items
Item # TSJHH Kencove Spinning Jenny with Brake
  • Adjustable brake to control overspin
  • Accommodates most coil diameters

$79.75
Item # TCTHD 9" Heavy-Duty Wire Cutters
  • Strong jaws
  • Small enough to fit in your pocket!

$16.50
Item # HBS 1.75" Barbed Staple
  • Class 3 galvanized
  • Double barbed for superior hold
  • Approximately 52 staples per pound
per lb
$2.45
Item # TDSD Staple Starter-Driver
  • No moving parts - easy to use!
Standard
$11.95
Item # TCHK Kencove Chain Grab
  • Long chain with anchor hook
  • Accommodates smooth and coated wire
  • High quality cast walking arms and grabs

$67.50
Item # C23 Crimp Sleeves 12.5 Gauge
  • Use with 12½ gauge wire
  • Gritted for superior holding
  • Made in USA
Bottle of 100
$12.95
Pack of 2,000
$246.00
Bottle of 250
$32.38
Item # TFFG 4-Slot Crimping Tool, Red Handle
  • Crimps all gauge crimp sleeves
  • 5 year warranty
  • Made in China

$54.50
Item # CWL1213 Quick-Splice
  • Creates strong inline splices
  • Internal spring-loaded clamps
  • Splices wire without a tool!
12.5 Gauge
$1.59
14-16 Gauge
$1.59
8-11 Gauge
$1.59
Item # CWV1213 Quick-End
  • Internal spring-loaded clamps
  • Terminates wire at end posts
Item # TFP Fence Pliers
  • Great for cutting soft wire
  • Hammer head and staple puller

$9.75
Item # HTSHD Heavy-Duty Tension Spring
  • Indicates amount of tension on fence wire
  • Class 3 galvanized coating
  • Longest lasting spring on the market!

$5.75
Item # SAS Original KIWI Strainer
  • Hot-dip galvanized to resist weathering
  • Permanently hinged, flipper type catch
  • Spring holds latch tight against cog

$3.95
Item # TFH Handle for Hayes Tighteners
  • Tensions Hayes-style strainers

$5.00
Item # TDB3813 ⅜" x 13" Ship Auger Drill Bit
  • Hollow center flutes clear chips quickly
  • 9.5" twist length and a 13" overall length
  • Bore perfectly sized holes for brace pins

$7.95
Item # H1PE Brace Pin 10"
  • Hot-dip galvanized
  • 10" x .35"

$0.55
Box of 100
$41.65
Item # HQBS12 Quick Brace
  • 16.5 ft steel cable with pre-formed loop
  • Fast and easy to install
  • Use to make single 12 ft brace
12' Brace
$5.99
Item # TGTCC Heavy-Duty Tension Tool
  • Geared 10:1 mechanical ratio
  • Use with all sizes of Gripple, Fastlink, Fastlok
  • Made in China

$69.75