|
|
||
|
|||
|
|
|
|
Phone 800 KENCOVE (536-2683) |
Now you can Order On Line at our new site : www.kencove.com If there are price changes from the order form, we will notify you before shipping. If there are any comments or suggestions for this new site, please e-mail webmaster@fence-electric.com |
The Spring Grip Clip must be expanded to slide it onto the rod. Squeeze the loop end with your thumb and the short end of the spring clip with your middle finger. Your index finger can stabilize the clip by pulling on the long tail coming off the loop. Once installed, the clip grips to the rod yet the fence wire is easy to flick into the loop of the clip. The spring grip clip stays with the post when relocating the fence - unlike T-Posts which use a clip that is often lost while moving the fence. If a more permanent installation is needed, the stainless steel clip can be made to grip the post much tighter. Using a pair of locking pliers, bend the long tail around the rod and bend it around the short tail of the same clip. A slide-on plastic insulator (RPI-S), designed for electric twine, is also available to fit the 3/8 inch fiberglass posts.
| - Stainless Steel 3/8 inch Rod Clip 1 loop [(F3SPK100) ] (F3S) | |
| - Spring Steel 3/8 inch Rod Clip Light galv [(F3CPK100) ] (F3CPK50) | |
| - Stainless Steel ½ inch Rod Clip l loop (F2S) | |
| - Stainless Steel 5/8 inch Rod Clip 1 loop long tail (F5S) | |
| - Stainless Steel 2/3 inch Rod Clip 1 loop long tail (F23S) | |
| - Stainless Steel ¾ inch Rod Clip 1 loop long tail (F34S) | |
| - Stainless Steel 7/8 inch Rod Clip 1 loop long tail (F7S) | |
| - Stainless Steel 1 inch Rod Clip long tail (F1S) | |
| - Spring Steel 1.2 inch Rod Clip 1 loop (F1C) | |
| - Stafix Twine Insulator for 3/8 inch Rod Black plastic (RPI-S) | |
| - Western Rod Post Insulator for 3/8 to 5/8 inch rod and LD "T", 25/pk (RPY) | |
| - Rod Post Insulator fits 3/8", 1/2" and 3/4" diameter rods, it doesn't fit 5/8" and 2/3" rods, each (I14RP) |
The stainless steel TightGrip Clip (F3T) binds the fence wire tightly to the 3/8 inch rod. This keeps a dropper rod that is not pushed into the ground at the correct location. Only the top and bottom wires need to have this clip so the rod does not slide horizontally on the line wires toward the permanent posts. Use regular F3S clips for the middle wires. If the bottom wire is high enough off the ground, short suspended spacer rods make mowing under the fence much easier by allowing long distances between posts.
| - TightGrip 3/8 inch Rod Clip Stainless Permanent (F3T) |
The Nylon Drive Caps for 3/8, 1/2, 5/8, 2/3 and 3/4 inch fiberglass rods prevent splintering of the fiberglass ends when hammering rods into the ground or offsets into wood posts. The cap is also handy when pushing rods into the ground with your hands. If you are installing a large number of fiberglass posts, the 3/8 inch Hand-Held Post Pounder makes the job easier.
(F5N) (F34N)| - Drive Cap Fits 3/8 inch fiberglass rod (F3N) | |
| - Drive Cap Fits ½ inch fiberglass rod (F2N) | |
| - Drive Cap Fits 5/8 and 2/3 inch fiberglass rod (F5N) | |
| - Drive Cap Fits ¾ inch fiberglass rod (F34N) | |
| - Post Pounder Hand held For 3/8 inch rods FOB (TP3) | |
| - T-Post Pounder Spring Loaded FOB (TPD) |
The Wire Twisting Tool (TWT) makes wrapping wire simple. This tool is especially helpful for bending preformed clips onto Multi-groove Wood or Poly Battens or Fiberglass T-Posts. The Twisting Tool is not needed for splicing smooth high tensile wire if the proper techniques are used.
| - Wire Twisting Tool, Rod Type, For bending clips (TWT) | |
| - Short Flat Steel Wire Twisting Tool, for tight spaces (TWTL) | |
| - Wire Clips for HD T Posts 100/pk (FHC) | |
| - Wire Clips for LD T Posts 100/pk (FLC) | |
| - Wire Clips for Wood battens 1½ inch face 100/pk (FC1) | |
| - Clips for PKD rounded Poly-Droppers 100/pk (FCPK) | |
| - Steel T Post Clips, in bags of 25 but sold as each (FTC) |
Our Cotter Pins (FCPC) are an economical way to fasten the wire to line posts or spacer battens. Holes must first be drilled in the rods or wood. Clip the pin onto the wire, put the 2 legs of the pin through the hole and bend the ends back to the fence wire.
| - Cotter Pin, for drilled fiber or wood battens, 5½", 100/pk (FCPC) |
|
Phone : 800 536-2683 or 724 459-8991 FAX : 724 459-9148 |
Main Office : Kencove Farm Fence, Inc. 344 Kendall Road Blairsville, PA 15717-8707 |
Also shipping from : Kencove Farm Fence, Inc. 113 West 5th Street Earl Park, IN 47942 |
| E-mail : fence@kencove.com | ||
| Mail or Fax Order Form | Pricing |
( Catergorical Listings
)