|
Products
Quick Add
|
 |
Brace Pins |
 |
|
Details
|
Brace Pin 12"
- Hot-dip galvanized
- 12" length
- 0.33" - 0.35" diameter
|
|
| |
|
Details
|
Brace Pin 5"
- Hot-dip galvanized
- 5" length
- 0.33" - 0.35" diameter
|
|
| |
|
Details
|
Brace Pin 10"
- Hot-dip galvanized
- 10" length
- 0.33" - 0.35" diameter
|
|
| |
|
Earth Anchors |
|
|
Details
|
Earth Anchor 88
- Use to hold down a lifting post
- 3000lb hold
- Galvanized cast iron
|
|
| |
|
Details
|
Drive Rod
- Hardened, machined, steel rod
- 36" x ¾" diameter
- Use with DB6 earth anchor
|
|
| |
|
Details
|
Earth Anchor 68
- 1100lb hold
- Galvanized
- Easily installed
- Use to hold down a lifting post
|
|
| |
|
Quick Braces |
|
|
Details
|
12' Quick Brace
- Includes 18' of 8 gauge, steel cable with a pre-formed loop
- Fast and easy to install
- Use to make a single 12' brace
|
|
| |
|
Details
|
H-Brace Hardware Kit
- Use to support h-braces
- Dacromet coated steel hangers
- Includes #2D drive Dacromet screws
|
|
| |
|
Dynamic Diagonal Brace |
|
|
Details
|
Dynamic Diagonal Brace
- Floating brace
- Assembles in minutes after anchor post is in place
- Build it on any terrain
- Use it at corners and ends of multi-strand high-tensile fences
- Easier to build, nearly as strong as more complex H-braces
|
|
| |
|
Screws - Nails |
|
|
Details
|
Square Head Drive Bit
- #2 square drive bits
- For use with 1.75" stainless steel screws
- 2 per pack
|
|
| |
|
Details
|
Stainless Steel Screws 1.75"
- Ideal for use with ACQ and natural select treated lumber
- Stainless steel for longevity
- Square head for quick installation
|
|
| |
|
Details
|
Lag Screw and Washer
- Galvanized
- Use to install Horserail brackets and buckles
|
|
| |
|
Staples |
|
|
Details
|
Staple Starter
- Very simple to use
- Has no moving parts to damage
- Saves your fingers and prevents staples from mushrooming
- Use with standard fence staples up to 8 gauge
|
|
| |
|
Details
|
1½" Double-Barbed Staple 
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 66 staples per pound
|
|
| |
|
Details
|
Wide 2" Double-Barbed Staples
- Class 3 galvanized
- Double barbed for superiod hold
- Ideal for use with plastic-coated wire
- Approximately 46 staples per pound
|
|
| |
|
Details
|
1" Staple Driver
- Prevents bent staples
- For use with 1" Ponyrail
- Easy to use
|
|
| |
|
Details
|
1¾" Double-Barbed Staples
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 52 staples per pound
|
|
| |
|
Details
|
2" Double-Barbed Staples
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 48 staples per pound
|
|
| |
|
Details
|
Strainrite Staple Puller
- Enables one-handed staple pulling
- High performance wire cutter and cable stripper
- Ergonomic design
|
|
| |
|
Details
|
1¼" Single-Barbed Staples
- 1¼" staples
- Single-barbed
- Class 3 galvanized
- Approximately 90 staples per pound
|
|
| |
|
Tension Springs |
|
|
Details
|
Strainrite Wire Tension Tester
- Contractor grade
- Large, easy-to-read scale
- Durable construction and gold-zinc plating
- Made in New Zealand
|
|
| |
|
Details
|
Tension Indicator Spring
- Acts as shock absorber
- Allows for expansion & contraction of wire
- Reduces over tensioning
- High Tension applications
|
|
| |
|
Details
|
Mini Tension Indicator Spring
- Use with twine, ribbon, or aluminum wire
- Designed for low tension applications
- Stainless steel
|
|
| |
|
Wire Tighteners |
|
|
Details
|
Rapid Tightener
- Fast and easy to use
- Use with EZ-Daisy strainers
|
|
| |
 |
|
|
|
|
Items per page:
|
|
