Kencove PD100H Post Driver

Kencove PD100H Post Driver
https://img.kencove.us/products/pd100h_2015_angle_450_450-95635.jpg
product
The Kencove PD100H Post Driver is durable and reliable.

  • Drives steel posts, wood posts, and railroad ties up to 8¾" diameter X 10' tall
  • 71,500 pounds of impact at full stroke
  • Hydraulic tilt features: 15-degree front-back and 15-degree side-side
  • Comes complete with 3-point hitch Category I & II and secure-stand base
  • Maximum hydraulic limit: 2,500 PSI

The return line (dump line) must return to your hydraulic fill reservoir. This line cannot be quick coupled back into your machine.

When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.

NOTE: Some assembly is required.

To see if your tractor is compatible with this post driver, use tractordata.com as a general reference.