|
Products
Quick Add
|
|
|
Spring 8/16 Each
Replacement post driver spring for Kencove PD8 or Shaver HD-8 or HD-16. Includes ends.
Note: When installing new springs, remember to raise and lower the driver slowly about 50 times to extend the life of the spring.
|
|
Catalog page: 48
|
|
 |
Similar Items |
 |
|
Item # GSC |
Spring Gate
- Large diameter spring
- Expands to 14 feet
- Easy installation
|
|
| |
|
Item # HTSHD |
Tension Spring -Heavy Duty
- Indicates amount of tension on fence wire
- Class 3 galvanized coating
- Longest lasting spring on the market!
|
|
| |
|
Item # ITE |
Pin-lock T-Post Insulator
- Our most versatile pinlock insulator!
- Holds large diameter products like coated wire and rope
- Nail to wood post or snap onto t-post
|
|
| |
|
Item # MEL |
Flood Gate Controller
- Automatically limits power drained by weeds or flood
- Upper wires remain electrified
|
|
| |
|
Item # MSD |
Solar DollyTM
- Put your solar system on wheels!
- Adjustable angle brackets and compass included
- Made in USA
|
|
| |
|
Item # MWLA |
Lightning Diverter
- Protects energizer from lightning damage
- Features choke coil and arrestor combination
- Re-usable
|
|
| |
|
Item # R2W |
Stafix Polywire
- 6 stainless steel conductors
- UV-stabilized polyethylene to resist weathering
|
|
| |
|
Item # RMININ |
Mini Reel with Lynch Pin
- Ideal for rotational grazing and portable fence
- Lynch pin for easy spool replacement
- Lightweight yet durable
|
|
| |
|
Item # TCHK |
Kencove Chain Grab
- Long chain with anchor hook
- Accommodates smooth and coated wire
- High quality cast walking arms and grabs
|
|
| |
|
Item # VJV |
Megaflow Trough Valve
- Side and bottom mounting
- High flow valve for underwater installation
- 5 - 150 PSI pressure rating
|
|
| |
|
Item # VPX |
Stafix Fault Finder
- Indicates direction of an electrical short
- Audible tones and backlit LCD screen
- Memory of last reading
|
|
| |
|
Item # WSWH |
Hotcote® Fence Wire
- Plastic coated wire - can be electrified
- Safe and attractive perimeter fence
- High-quality 200KSI 12.5 gauge core
|
|
| |
|
Item # EAK |
Kencove Strip Grazer
- .35 joule output
- Operates from D-cell batteries or 12-volt
- Includes 3 year warranty!
|
|
| |
|
Item # GNC |
Gate Handle
- Galvanized expansion spring
- More tolerance for gate post movement
|
|
| |
|
Item # HTSL |
Tension Spring -Long Tug
- Tension indicator notches
- Indicates amount of tension on fence line
- Acts as a shock absorber
|
|
| |
|
Item # ITDB |
2-Pin T-Post Insulator
- Attaches securely with pin
- Our most durable t-post insulator
- Fits coated wire, twine or electric rope
|
|
| |
|
Item # PD10S |
Spring 10⁄20
- For use with HD10 or HPD20 post driver
- Includes spring ends
|
|
| |
|
Item # TSC4 |
Stretcher Bar
- Includes wedges
- Use to install woven wire fence
|
|
| |
|
Item # VPA |
Kencove Fault Finder
- Digital readout displays voltage, amps and direction
- Ideal for fence wire, twine, rope or netting
- Designed and assembled in USA
|
|
| |
|
Item # WL4 |
Soft Wire 14 Gauge
- Convenient dispenser
- Class 3 galvanized wire to resist rust
- Fast & easy to use
|
|
| |
|
Item # HMSS |
Mini Spring -Stainless
- Use with twine, ribbon, or aluminum wire
- Stainless steel
- Designed for low tension applications
|
|
| |
|
Item # RRSC |
1:1 Value Reel
- Holds up to 1640' twine or 656' ribbon
- 1:1 gear ratio
- Built-in wire guide
|
|
| |
|
Item # RRSG |
Obriens Geared Reel - Single
- 3:1 gear ratio for quicky, easy rewind
- Holds up to 1640' twine or 656' ribbon
- Includes gate handle (GPL)
|
|
| |
|
Item # SAS |
Original Kiwi Strainer
- Hot-dip galvanized to resist weathering
- Permanently hinged, flipper type catch
- Spring holds latch tight against cog
|
|
| |
|
Item # EK6 |
Kencove Fence Energizer
- Three year warranty
- 2 diagnostic indicator lights
- Pre-programmed for remote control
|
|
| |
|
Item # RPTW |
Pigtail Step-In Post
- 36" overall height
- Holds all sizes wire, twine, rope or ribbon
- Robust galvanized high tensile steel shaft
|
|
| |
|
Item # MPS |
Power Surge Protector
- Economical protection from power spikes/surges
- Indicator light shows status
- Protects from surges up to 6000v
|
|
| |
|
Item # TEP |
EZE-Pull Fence Tool
- Crimps all 12.5 gauge sleeves
- Hardened stainless steel jaws
- Wire cutter, crimper, staple puller, cable stripper
|
|
| |
|
Item # WTW |
Kencote Wire 12.5 Gauge
- Made with 200 KSI, 12.5 gauge wire
- Coated with UV-resistant polyethylene
- Thirty-year manufacturers warranty
|
|
| |
|
Item # EK13 |
Kencove Fence Energizer
- Pre-programmed for remote control
- Half power switch and diagnostic lights
- Three year warranty
|
|
| |
|
Item # GSL |
Spring Gate Long
- Large diameter spring
- Expands to 24 feet
- Easy installation
|
|
| |
|
Item # SAAPMG |
Donalds-style Strainer
- Aluminum cog - galvanized strap
- Tighten with crescent or box wrench
- Stainless steel spring clip
|
|
| |
|
Item # SDZ |
Solid Zinc Cog Tightener
- Solid Zinc cog
- Tensioning with a crescent, box or open end wrench
- Wider cog holds more wire
|
|
| |
|
Item # SID |
Insulated Wire Tightener
- Perfect for end post terminations
- Dacromet coating for longevity
- Rugged enough for high strain applications
|
|
| |
|
Item # EK15 |
Zareba 15 WASP
- 15 joule output
- Free storm guard with lightning protection
- One-year warranty
|
|
| |
|
Item # EX20R |
Stafix Energizer
- 22 joule output
- Includes remote control and LED display
- Two year warranty
|
|
| |
|
Item # GSLW |
Spring Gate
- Powder coated white
- Electrically conductive
- Easy to install
|
|
| |
|
Item # GSR |
Electric Bungy Cord Gate
- Safer and more visable than spring gates
- Cord stretches to twice its length
- Includes gate hook up set
|
|
| |
|
Item # TFU |
Universal Strainer Handle
- Works with Hayes and Donalds style strainers
- Self-ratcheting for ease of use
- High-strength steel drop pin
|
|
| |
|
Item # GBFT |
Electric Bungy Cord
- 6 stainless steel conductors
- White with red stripe
- 1/3" diameter
|
|
| |
|
Item # TCTGC |
Cable Cutter
- Spring-loaded handle
- Ideal for cutting cable, rope or twine
|
|
| |
|
Item # CBT |
Split Bolt Line Tap - Zinc
- Holds up to four 12.5 gauge wires
- Ideal for electrical hook-ups
- Disconnects easily for troubleshooting shorts
|
|
| |
|
Item # CGLP |
Gripple Large Plus
- Ceramic locking mechanism for superior grip
- Use with 10 - 7.5 gauge smooth wire
|
|
| |
|
Item # CGM |
Gripple Medium
- Simple and effective way to join or tension wire
- Use with 14-10 ga wire or 15.5 ga barbed wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # CGT |
Gripple T-Clip
- Secures wire at start or end of fence line
- Use with 14 -10 gauge wire
- No knotting or stapling!
|
|
| |
|
Item # CLO |
Fastlok Wire Splicer
- Use with 12.5 gauge wire
- Strong and re-usable
- Ideal for use at ends and brace wires
|
|
| |
|
Item # CWL1213 |
Quik-Splice
- Creates strong inline splices
- Internal spring-loaded clamps
- Splices wire without a tool!
|
|
| |
|
Item # CWTW |
Safety-Loop Connector
- Quickly and easily terminate coated wire
- Use with any 12.5 gauge smooth or coated wire
- Can also be used on bracing units
|
|
| |
|
Item # CWV1213 |
Quik-End
- Terminates wire at end posts
- Internal spring-loaded clamps
|
|
| |
|
Item # DB6DR |
Drive Rod
- 1/2" x 32.5"
- Use with DB6 earth anchor
|
|
| |
|
Item # EKD1 |
Kencove Dual Purpose Energizer
- LED lights show voltage and battery condition
- Includes AC adapter and battery leads
- Three year warranty includes lightning damage
|
|
| |
|
Item # F12-4D |
1⁄2" FiberRod SunGuard
- Pre-drilled every 2 inches
- Coated to prevent splintering
- Will not rust, rot or crack due to cold
|
|
| |
|
Item # F23-5SG |
2⁄3" FiberRod -SunGuard
- Durable - flexes on impact
- Will not rust, rot or crack due to cold
- Coated to prevent splintering
|
|
| |
|
Item # F38-4SG |
3⁄8" FiberRod SunGuard
- Durable - flexes on impact
- Coated to prevent splintering
- Will not rust, rot or crack due to cold
|
|
| |
|
Item # F38-4Y |
3⁄8" FiberRod
- For use with fencing, line markers or parking lots
- High visibility
- UV-stabilized
|
|
| |
|
Item # F38SSG |
SunGuard Step-In Post 3⁄8"
- 3/8" diameter x 4' length
- Will not rot, rust or cause shorts
- Accommodates wire, rope or electric tape
|
|
| |
|
Item # FCPCH |
Cotter Pins 5" x 14 Gauge
- Perfect for use with 1/2" fiberglass posts
- 14 gauge
- Economical way to fasten wire to line posts
|
|
| |
|
Item # GSCW |
Spring Gate
- Electrically conductive powder coating
- Easy to install
|
|
| |
|
Item # GU50 |
Underground Wire
- 12.5 gauge single wall insulated wire
- Class 3 galvanized low carbon
- UV-polyethylene
|
|
| |
|
Item # HBS |
1.75" Barbed Staple
- Class 3 galvanized
- Double barbed for superior hold
- Approximately 52 staples per pound
|
|
| |
|
Item # HQBS12 |
Quik Brace
- 16.5 ft steel cable with pre-formed loop
- Fast and easy to install
- Use to make single 12 ft brace
|
|
| |
|
Item # HSS175 |
Stainless Steel Screws 1.75"
- Ideal for use with ACQ and natural select treated lumber
- Stainless steel for longevity
- Square head for quick installation
|
|
| |
|
Item # I4UW |
Bull Nose End Post Insulator
- Fiberglass reinforced for superior strength
- Ideal for end or corner applications
- UV-resistant polyethylene
|
|
| |
|
Item # I50 |
Fin Tube Insulator
- Side flanges make installation fast and secure
- UV-Stabilized to resist weathering
|
|
| |
|
Item # I6X |
12" Offset Bracket
- Extends wire 12" from post
- Great insulation from the bracket wire
- Easy to attach onto smooth or woven wire
|
|
| |
|
Item # I8P |
Pin-Lock Insulator
- Removable pin
- Large spark flange prevents arching
- Strong, durable plastic
|
|
| |
|
Item # ICCW |
Nail-on Claw Insulator
- Extremely versatile
- Use with high-tensile, twine or coated wire
- UV-stabilized heavy duty plastic
|
|
| |
|
Item # ICPW |
Corner CollarTM
- A must-have for corner wood posts
- Easy to use pin-lock design
- Accommodates rope, braid or Hotcote®
|
|
| |
|
Item # ILC |
Heavy Duty Lag Corner Insulator
- Ideal for high-tension applications
- L-shaped 3/8" diameter zinc plated lag screw
- UV-stabilized high grade plastic
|
|
| |
|
Item # IMP35 |
Tube Post Offset Insulator
- Designed for chainlink posts or round tubing
- Fits horizontally or vertically
- Accommodates twine, wire or 1/4" rope
|
|
| |
|
Item # KPDA |
Kiwi Auger
- Powered by HD hydraulic motor
- Includes housing, motor, auger flight
|
|
| |
|
Item # KPDAB |
Auger Bearing
- For use with standard Kiwi auger system
|
|
| |
|
Item # KPDAHK |
Auger Hose Kit
- Includes hoses, couplings and fittings
- For use with Kiwi Hydraulic Auger System
|
|
| |
|
Item # MFA |
Fence Alert
- Flashes when low voltage detected
- Clips directly to the fence line
- Up to five year battery life
|
|
| |
|
Item # MPBC24 |
Battery Cable
- For use with solar charge controller
- Two convenient alligator clips with cable
|
|
| |
|
Item # MPC |
Jumper Leads
- Provides secure connection between reel and fence
- Strong, durable 3" clips
|
|
| |
|
Item # MSP100KP |
Portable Solar Kit
- Equipped with controller and battery cables
- Folds to 22" x 27"
- Includes convenient carry case
|
|
| |
|
Item # NPP |
48" Electric Netting Post
- For use with 48& electric netting
- Split-top allows for re-positioning
- Foot pedal and steel spike for easy installation
|
|
| |
|
Item # NSG12X50 |
Electric Netting 12⁄40⁄7
- Ideal for apiary/bear exclusion fence
- Save money on this short length net
- Free shipping!
|
|
| |
|
Item # PP1.125X4.5W |
PasturePro Post 1.125" x 4.5'
- Wood-plastic composite flexes on impact
- Lightweight yet extremely durable
- Self-insulating and is easily drilled
|
|
| |
|
Item # PP1.25X5W |
PasturePro Post 1.25" x 5'
- Wood-plastic composite flexes on impact
- Lightweight yet extremely durable
- Self-insulating and is easily drilled
|
|
| |
|
Item # PPPD |
Pilot Driver
- Perfect for tough, rocky soil
- Steel spike and large handles
- Use with PasturePro composite posts
|
|
| |
|
Item # RBT43S3CW |
Braided Twine Mixed Metal 3SS 3CU
- 3 stainless steel PLUS 3 tinned copper conductors
- Carries charge over long distances
- UV-stabilized for weather resistance
|
|
| |
|
Item # RBT49SSW |
Braided Twine 9SS
- 9 stainless steel conductors
- Maintains conductivity
|
|
| |
|
Item # RR3C |
3:1 Value Reel
- 3:1 gear ratio
- Holds up to 1640' twine or 656' ribbon
|
|
| |
|
Item # RRB |
Economy Single Reel
- Holds up to 1650 ft twine
- Rugged handle hook
- Replaceable nylon bushings
|
|
| |
|
Item # RWRG |
½" Electric Ribbon
- 6 stainless steel conductors
- Ideal for temporary, portable or subdivision fences
- UV-Stabilized
|
|
| |
|
Item # SSDK |
KIWI Online Strainer
- Solid zinc cog
- Class 3 galvanized clip
- Strongest non-splicing wire strainer
|
|
| |
|
Item # SSDN |
EZ Daisy with Clip
- Install inline without cutting wires
- Tighten with 1/2" drive ratchet or EZ Daisy handle
|
|
| |
|
Item # SSDR |
EZ Daisy with Clip
- Install inline without cutting wires
- Designed for ropes and light gauge wires
- Powder coated white
|
|
| |
|
Item # TDB3413 |
3⁄4" x 13" Ship Auger Drill Bit
- Bore perfectly sized holes for your gate hardware
- Black oxide flutes and self-feeding screw point
- Two recesses in shank to allow for extension set screws
|
|
| |
|
Item # TDB3813 |
3⁄8" Ship Auger Drill Bit
- Hollow center flutes clear chips quickly
- 9.5" twist length and a 13" overall length
- Bore perfectly sized holes for brace pins
|
|
| |
|
Item # TDBS |
Square Head Drive Bit
- #2 square drive bits
- For use with 1.75" stainless steel screws
- 2 per pack
|
|
| |
|
Item # TFP |
Fence Pliers
- Great for cutting soft wire
- Hammer head and staple puller
|
|
| |
|
Item # TGTTP |
Gripple Torque Tool
- Adjustable torque gauge
- Delivers up to 800lbs of load
- 6:1 gearing system
|
|
| |
|
Item # THS4 |
Spooler Handle Set
- Provides maximum leverage
- Includes 2 ratchets, handle and spooler pin
- Use with 4" Horserail Spoolers
|
|
| |
|
Item # TWP |
Easy Wire Puller
- Use with smooth and barb wire
- Rugged cast iron jaw
- Sixteen inch detachable pipe handle
|
|
| |
|
Item # VCR |
Quick Coupler Riser
- One-handed operation
- Use in above ground or buried water systems
|
|
| |
|
Item # WEB4W |
End Buckle Pre-Bent
- Galvanized and powder coated
- Use to attach HorseRail to end posts on flat terrain
|
|
| |
|
Item # WH6 |
Woven 19/72/2 Class 3
- Class 3 galvanized
- 72" height - ideal for predator control
- 2" X 4" spacing
|
|
| |
|
Item # WR4W |
1" Ponyrail 14 Gauge
- Two 14 gauge core wires for strength
- High visibility and low maintenance
- Twelve year limited warranty
|
|
| |
|
Item # WSB94W |
90° Inside Bracket
- Use with 90 degree turns with Horserail
- Hot-dip galvanized and powder coated
|
|
| |
|
Item # WSBL4W |
Line Bracket
- Use to attach HorseRail to wood line posts
|
|
| |
|
Item # WSSS4W |
4.25" Split Spooler
- Install onto existing HorseRail fence to eliminate sag
- Galvanized and powder coated
|
|
| |
|
Item # WSX12820W |
Safety Shock 820 ft
- Electric fence wire with white coating
- Safe for use with horses
- Made in USA
|
|
| |
|
|
